[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: secoundary wire size

To: tesla@xxxxxxxxxx
Subject: Re: secoundary wire size
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 11 Oct 2006 21:01:42 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Wed, 11 Oct 2006 21:09:31 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <KF4gvhxa7sE.A.PzD.qHbLFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: John <guipenguin@xxxxxxxxx>

Dr. Resonance,

Would it be acceptable / OK to use the thicker #24g wire with my 30mAnst? What kind of performance loss are we talking about?I did a sloppy job winding the #28g wire, and I'm planing onre-winding a new pipe with my spool of #24 gauge wire.


Thanks,
      John.

On 10/11/06, Tesla list <<mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx> wrote:

Original poster: "resonance"<<mailto:resonance@xxxxxxxxxxxx>resonance@xxxxxxxxxxxx>




With the small drive current, only 30 mA, you will get best
performance with either 28 or 30 AWG magnet wire.

Dr. Resonance

Prev by Date: Re: Getting brave.
Next by Date: Split Flex Tubing?
Previous by thread: Re: secoundary wire size
Next by thread: Re: secoundary wire size
Index(es):
- Date
- Thread