Re: secoundary wire size

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Mike <megavolts61@xxxxxxxxx>

Hi Terry,  all,
   Just to add a lil to what Terry said,   I found this to be an 
excellent coating for secondary coils.

<http://rshughes.com/products/075577_90600.html>http://rshughes.com/products/075577_90600.html

Mike

Hi John,

Your coil will work perfectly fine!!  I like # 24 for spark gap coils
and #28 for solid-state stuff.  (it's been about two years since I
have even run a spark gap coil now =:O)  But as long as your coil is
not wildly out of the norm, it will be just fine.  Don't worry at all
about little air gaps.

You should spray it with clear polyurethane or something just to
"lock" the windings in place unless you are going to do that anyway.

Cheers,

         Terry


At 08:11 PM 10/10/2006, you wrote:
>What is a good gauage wire for a 4" / 20" coil powered by a 12kv 30mA
xformer?
<snip>


Stay in the know. Pulse on the new Yahoo.com. 
<http://us.rd.yahoo.com/evt=42974/*http://www.yahoo.com/preview>Check it out.