Re: wintesla vs teslamap

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "resonance" <resonance@xxxxxxxxxxxx>



Use 1,000 Watts for ft. of spark to get an approximate idea of 
performance. A larger topload like a 14 x 5 toroid or 20 x 5 will 
usually provide longer sparks than the spheres.

Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, October 04, 2006 12:25 AM
Subject: wintesla vs teslamap


> Original poster: Slurp812 <slurp812@xxxxxxxxx>
>
> Iv been doing some primary/secondary calculations with both 
> programs, and all else being equal (at least I think so) WinTesla 
> shows 14.7 turns for the primary, and TeslaMap shows 10-11 turns. I 
> am assuming that this is typical as there are so many varaibles in 
> actual construction that can change the resonant frequency. anyway, 
> heres what I am working on so far:
>
> 15/30 NST
> ~9nf cap
> 3.5 inch OD pvc for the seconday coilform
> 17 inches of 28awg magnet wire ~1135 feet, ~1239 turns
> 12 gauge (.064mm) bare copper wire for the primary (yes its 
> small)  5.5 inch inner diamater .2 inch spacing
> ~10 inch diameter sphere for topload (thats what I am using for 
> calculations so far)
>
> I am hoping for 1 foot or better streamers, does that sound resonable?