[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Question about capacitors for coil



Original poster: "resonance" <resonance@xxxxxxxxxxxx>





You could consider going to a 24 AWG wire to lengthen it for the 1,000 turns.

Dr. Resonance


Sorry for asking so many questions.... I am limited on resources and want to /try/ and have a good design as my first coil.

So 4" diameter and 28g wire.... 1000 turns gives me (about) 13.7 in height which is really squat. This should give me decent results? Because 14" is quite far rom what Dr. Resonance said about 24-26" with 30g wire....which would obviously be way more turns.....