[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Spiral maker?

To: tesla@xxxxxxxxxx
Subject: Re: Spiral maker?
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Tue, 21 Nov 2006 18:58:11 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Tue, 21 Nov 2006 18:58:57 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <t9qxy3QiSPP.A.bi.h76YFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "resonance" <resonance@xxxxxxxxxxxx>




Yes,   Resonance Research Corp at www.resonanceresearch.com

Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Tuesday, November 21, 2006 12:23 PM
Subject: Spiral maker?

Original poster: StephenTetorka@xxxxxx
Hi All:
Might anyone know who can make/supply wireform spirals?
Dimension of approx 3 foot diameter having approx 6 turns...wire tobe aluminum or copper rod 1/8 inch diameter.
Kind regards,
Steve

Prev by Date: Re: Maxwell 37667 pulse caps
Next by Date: Re: Primary- vs. secondary-current feedback
Previous by thread: Re: Spiral maker?
Next by thread: RE: Spiral maker?
Index(es):
- Date
- Thread