[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: another question

To: tesla@xxxxxxxxxx
Subject: RE: another question
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 15 Nov 2006 08:14:06 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Wed, 15 Nov 2006 08:15:22 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <ooR7p3VakEG.A.prE.C8yWFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Russell,

We (I) often over volt these with a variac to ***140V*** or so and set my
safety gap at this voltage. Anything more then that would likely overheat
the primary and break down the secondary dialectric. These are not hearty
beasts and were not designed for this use or abuse.

Regards,
Jim Mora

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Tuesday, November 14, 2006 5:22 PM
To: tesla@xxxxxxxxxx
Subject: another question

Original poster: russell dischar <hightechredneck2005@xxxxxxxxx>

could you put 220v to a nst thats rated at 120v. i imagine it would
burn up the secondary but i was just wonderin if any one has done it.

Prev by Date: Re: another question
Next by Date: Re: kent wax
Previous by thread: Re: another question
Next by thread: Re: another question
Index(es):
- Date
- Thread