RE: 4 x 13 torrid needed

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Alan Majernick" <rainylake@xxxxxxx>

I stock the turned aluminum ones at my eBay store

"TeslaStuff"

http://cgi.ebay.com/4-X-13-Toroid-Tesla-Coil-Top-Load-to-Neon-Transformer_W0QQitemZ140049692839QQihZ004QQcategoryZ4665QQrdZ1QQcmdZViewItem

http://stores.ebay.com/TeslaStuff

Thanks Alan

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Sunday, November 05, 2006 5:04 PM
To: tesla@xxxxxxxxxx
Subject: Re: 4 x 13 torrid needed
Original poster: Shaun Epp <scepp@xxxxxxx>
I guess you'll have to build one.  I made one with (I think it was)
dryer duct elbows.  Then I rivited them together and also riveted
brass strips across the toriod (in an X) to make a centre support /
connection.  It doesn't look as pretty as a spun toroid but it's
cheap.  Others on this list coat them a cover and aluminun foil tape
to make them smoother.
What are the specs of your coil ?  People on this list can advise you
if a 4" by 13"  torroid is the proper size for your coil.

Shaun


----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, November 05, 2006 11:29 AM
Subject: Re: 4 x 13 torrid needed


>Original poster: "Joshua Gutfriend" <josh123spartan@xxxxxxxxxxx>
>
>I live in Alberta. I checked information Unlimited and after
>shipping and handling and currency conversion it's gone out of my
>price range never mind the duty tax of getting it across the border.
>
>Josh
>
>
>>From: "Tesla list" <tesla@xxxxxxxxxx>
>>To: tesla@xxxxxxxxxx
>>Subject: Re: 4 x 13 torrid needed
>>Date: Sat, 04 Nov 2006 22:14:11 -0700
>>
>>Original poster: Shaun Epp <scepp@xxxxxxx>
>>
>>Well I know some people on this list have a problem with this
>>company, but Information Unlimited has smaller toriods
>>available.  I used one on my tesla coil and it works but I've been
>>informed that it is too small for the power I'm running.  Check out this
link:
>>http://www.amazing1.com/toroids.htm
>>
>>What province do you live in.  I'm in Winnipeg, Manitoba
>>
>>Shaun Epp
>>
>>
>>
>>----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
>>To: <tesla@xxxxxxxxxx>
>>Sent: Saturday, November 04, 2006 3:21 PM
>>Subject: Re: 4 x 13 torrid needed
>>
>>
>>>Original poster: "resonance" <resonance@xxxxxxxxxxxx>
>>>
>>>
>>>
>>>I have 20 x 5 size toroids.
>>>
>>>Dr. Resonance
>>>----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
>>>To: <tesla@xxxxxxxxxx>
>>>Sent: Saturday, November 04, 2006 7:53 PM
>>>Subject: 4 x 13 torrid needed
>>>
>>>
>>>>Original poster: "Joshua Gutfriend" <josh123spartan@xxxxxxxxxxx>
>>>>Does anyone have a 4 x 13 torrid that I can buy from them at a
>>>>reasonable price? PS I live in Canada so shiping might be a problem.
>>>>Josh
>>>>_