[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: PIRANHA - New Top Load Configuration

To: tesla@xxxxxxxxxx
Subject: RE: PIRANHA - New Top Load Configuration
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Fri, 03 Nov 2006 22:36:30 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
In-reply-to: <001201c6ffd0$f2771a10$6602a8c0@DFNN7M91>
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
References: <6.2.3.4.2.20061103204318.01e64108@xxxxxxxxxxxxxxxxxxxxxxx> <001201c6ffd0$f2771a10$6602a8c0@DFNN7M91>
Resent-date: Fri, 3 Nov 2006 22:36:24 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <6lgCESaa02G.A.oJF.YbCTFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>

At 10:20 PM 11/3/2006, you wrote:

Terry,
Just out of curiosity what program are you using for that simulation?

Brian
.........
http://drsstc.com/~piranha/PIRANHA/PIRANHA-2/newcoil-01.jpg

.........

It's Ansoft's Maxwell SV.  A "free" program :-)))))))))

Their site is down tonight, but you can find it there:

http://www.ansoft.com/

It is an old 80's style interface and logic thing (think of it as"well tested" :o))) but it works real good.


Cheers,

        Terry

References:
- Re: PIRANHA - New Top Load Configuration
  - From: Tesla list

Prev by Date: RE: PIRANHA - New Top Load Configuration
Next by Date: 4 x 13 torrid needed
Previous by thread: Re: PIRANHA - New Top Load Configuration
Next by thread: Re: PIRANHA - New Top Load Configuration
Index(es):
- Date
- Thread