Multilayer secondary solution to SIGS, DRSSTCs, and OLCTs

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Joshua Gutfriend" <josh123spartan@xxxxxxxxxxx>

In reading that SIGS have a low Q that could decrease performance so 
why don't you just wind more than one layer on the secondary and just 
have like two layers of varnish and connect however many coil layers 
you wound in parallel. The resonant frequency stays the same but it 
seems that you wound the coil with thicker wire resistance wise. You 
could also inplement this on OLCTs and DRSSTCs to acheive even lower 
frequencys without the extra resistiance. It could also be 
inplemented on classic Tesla Coils. The only drawback would be the 
extra work but it wouldn't be to bad. All my info on this is from the 
tesla list archives.

Josh

_