Re: Terry Filter Assembly

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>

Hi,

A search of Yahoo images actually outdoes Google in this case:

http://www.peninsulators.org/Tesla/nstfilt1.jpg

http://www.peninsulators.org/Tesla/nstfilt2.jpg

http://madlabs.info/assets/images/tesla/fritzrf_big_01.jpg

http://hot-streamer.com/TeslaCoils/MyCoils/BigCoil/protection.jpg

http://hot-streamer.com/TeslaCoils/MyCoils/SmallCoil/small_protection.jpg

Just do what they all did.  I just use perf board.  20,000 kV might 
arc an inch to an inch and a half on a bad day...

Cheers,

        Terry


At 05:42 PM 5/30/2006, you wrote:
> Hello all,
>
> Is there a recommended method for putting together the components of 
> the Terry Filter according to the schematic?  Is it as simple as 
> using a perf board and soldering or crimping together the leads of 
> the various capacitors, MOVs etc?  Is there a recommended spacing 
> between components to prevent arching?
>
> Thanks.
>
> Martin Fryml