[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

twin stacked primary supports

To: tesla@xxxxxxxxxx
Subject: twin stacked primary supports
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 03 May 2006 07:12:38 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Wed, 3 May 2006 06:59:02 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <C302tkmjmKI.A.CIC.OkKWEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Mike Tucknott" <michael.tucknott@xxxxxxxxxx>

Hi All

The first of the 30deg twin stacked primary supports is now finished only
another 3 to build.

Go take a look at<http://freespace.virgin.net/michael.tucknott/bm6_coil_pictures.htm>http://freespace.virgin.net/michael.tucknott/bm6_coil_pictures.htm

Any comments welcome


Cheers Mike Tucknott

Smokin in south Oxfordshire UK
<http://freespace.virgin.net/michael.tucknott/tesla.htm>http://freespace.virgin.net/michael.tucknott/tesla.htm

Prev by Date: Re: Setting up a pole pig's wiring
Next by Date: RE: twin stacked primary supports
Previous by thread: RE: Simple Rotor balance approach, second thought
Next by thread: RE: twin stacked primary supports
Index(es):
- Date
- Thread