[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Setting up a pole pig's wiring

Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>

Mine has two LV coils but only one HV coil:


Does yours have a diagram showing this, or simply a
description? Mine does 14.4 and 7.2 kV so two diagrams
for the LV side.


--- Tesla list <tesla@xxxxxxxxxx> wrote:

> Original poster: "Gerry  Reynolds"
> <gerryreynolds@xxxxxxxxxxxxx>
> Hi Bart,
> When you say H2 is the side closes to the core, are
> you saying the
> inner winding of the H2 coil goes to the bushing.
> Could you describe
> the HV winding geometry??  one coil or two???   and
> how the
> inner/outer windings are connected???   My nameplate
> suggest two HV
> coils, but if this is the case, it would make no
> sense to me why the
> inner winding of one of the coils would be brought
> out to the HV
> bushing.   Everything you have said would make
> perfect sense if there
> was only one HV coil.
> Gerry R.
> >Original poster: "Barton B. Anderson"
> <bartb@xxxxxxxxxxxxxxxx>
> >
> >You're concern is certainly valid because we got
> our X's and H's
> >mixed up. H2 should be at RF ground. This is the HV
> side closest to
> >the core and when looking at the LV bushings, H2 is
> the HV bushing
> >on the right.