Re: I'm a newbie coiler!- apartment coiling

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "S&JY" <youngsters@xxxxxxxxxxxxxxx>

Gerry,
I don't know about Jim, but I was talking about two side-by-side coils, with
the bottoms of both secondaries connected together and to ground.  With a
pair of 4 x 23 secondaries, I have produced seven foot leaders between the
toploads.

--Steve Y.

----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, March 15, 2006 12:08 PM
Subject: Re: I'm a newbie coiler!- apartment coiling


> Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
>
> Hi Jim,
>
> Are we talking about a bipolar coil or two side by side secondaries
> each having their base grounded??
>
> Gerry R.
>
>
> >Original poster: Jim Lux <jimlux@xxxxxxxxxxxxx>
> >
> >At 09:07 AM 3/14/2006, Tesla list wrote:
> >>Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
> >>
> >>Hi Steve,
> >>
> >>I would think the two "identical" secondaries would run very close
> >>the the same frequency but once the primary rang down (no more
> >>forcing function), they might drift apart in phase, sometimes "in
> >>phase" and sometimes "out of phase".  Since no two things are
> >>exactly identical, what would keep them phased correctly??
> >
> >By putting the primaries in series, the currents are forced to be
> >exactly phased the same. Yes, there will be slight differences
> >between the secondaries, and the coupling isn't k=1, so there might
> >be small differences in phase, but overall, they'll be pretty close.
> >
> >
> >
> >
>
>
>
>
>
>
>