FW: .5 inch pure tungsten rod 1.5" long or, placing order

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Hi Group,

Tungsten (pure) .5 inch by 1.5 inch $15.00 ea. ****Ordering Soon.******
Crank up the piggy.

Jim Mora

________________________________________
From: Jim Mora [mailto:jmora@xxxxxxxxxxx]
Sent: Friday, March 10, 2006 11:02 AM
To: 'Celina@xxxxxxxxxxxxxxxxx'
Subject: FW: .5 inch pure tungsten rod 1.5" long or >

Hi,
I think I am ready to order. Next email will be quantity.
Jim
<snip>

________________________________________
From: Jim Mora [mailto:jmora@xxxxxxxxxxx]
Sent: Tuesday, March 07, 2006 6:37 PM
To: 'Celina@xxxxxxxxxxxxxxxxx'
Subject: FW: .5 inch pure tungsten rod 1.5" long or >

Cool 12 more

________________________________________
From: Jim Mora [mailto:jmora@xxxxxxxxxxx]
Sent: Tuesday, March 07, 2006 4:20 PM
To: 'Celina@xxxxxxxxxxxxxxxxx'
Subject: FW: .5 inch pure tungsten rod 1.5" long or >

So far we need 22. Lets give it a couple more days and see if anyone else
needs some. You got an email from Thomas for (10) I believe. I?ll Order them
all and distribute as needed.

Thanks,
Jim Mora



________________________________________
From: Jim Mora [mailto:jmora@xxxxxxxxxxx]
Sent: Monday, March 06, 2006 11:46 PM
To: 'Celina@xxxxxxxxxxxxxxxxx'
Subject: FW: .5 inch pure tungsten rod 1.5" long or >



________________________________________
From: Jim Mora [mailto:jmora@xxxxxxxxxxx]
Sent: Monday, March 06, 2006 10:23 PM
To: 'Jim Mora'
Subject: .5 inch pure tungsten rod 1.5" long or >

Hi Celina,
3-6-2006
Diamond Ground Products
Celina@xxxxxxxxxxxxxxxxx

I have made my 9/16x7? tungsten electrodes, blocks and heat sinks. I will
only need 8 cut total pieces of the ½? (green,pure) stock. We spoke of 1.5?
lengths but I would prefer these to be as long as possible out of the
standard 7 inch rod. This of course is dependent on the diamond cutting
blade thickness and tolerance. I understand the price to be $15.00 each and
a lead time to be as long as 8 weeks. I also understand there is a 25 piece
minimum. This being the case I will see if anyone on the Tesla discussion
group would like to piggy back on the order.

Very truly yours,
Jim Mora
Ojai
________________________________________
From: Jim Mora [mailto:jmora@xxxxxxxxxxx]
Sent: Monday, February 13, 2006 10:36 PM
To: 'Celina@xxxxxxxxxxxxxxxxx'
Subject: RE: Pure quote

Hi Celina,

Do you have any ½? round stock tungsten or larger on hand? I am looking hard
for (1) piece 8? or ? long for this project. Please call me 805 701 7569
regarding this.

I?ll place an order for the 1.5? long pieces at a later date. I have too
many projects going at once!

Thanks Much!
Jim Mora
Tesla Society
________________________________________
From: Celina@xxxxxxxxxxxxxxxxx [mailto:Celina@xxxxxxxxxxxxxxxxx]
Sent: Friday, February 10, 2006 10:13 AM
To: jmora@xxxxxxxxxxx
Subject: Pure quote

Hello Jim,
The quote for the 1/2" x 1.50" Pure Tungsten is $15.00 per piece with a 25
piece minimum.  The lead-time for this material is 8 to 10 weeks.
Regards,
Celina Elizarraz
Diamond Ground Products, Inc.
Fax No. (805) 498-9347
www.diamondground.com