Re: Pure tunsten 1/2 inch (12.7 mm) at 1.5 inch (38.1mm) orslightly longer $15 each

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "MIKE HARDY" <MHARDY@xxxxxxxxxx>

Ooops! I just sent my interest in going in on this bulk npurchase to the
supplier's e-mail by mistake. Hope this dodsn't mess things up. Please email
me off-list to make arangements. I would probably be interested in 10 pcs.
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Tuesday, March 07, 2006 4:56 AM
Subject: Pure tunsten 1/2 inch (12.7 mm) at 1.5 inch (38.1mm) orslightly
longer $15 each


> Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
>
> Hello All,
>
> Anyone interested in making a community buy?
>
> Hi Celina,
> 3-6-2006
> Diamond Ground Products
> Celina@xxxxxxxxxxxxxxxxx
>
> I have made my 9/16x7" tungsten electrodes,
> blocks and heat sinks. I will only need 8 cut
> total pieces of the ½" (green,pure) stock. We
> spoke of 1.5" lengths but I would prefer these to
> be as long as possible out of the standard 7 inch
> rod. This of course is dependent on the diamond
> cutting blade thickness and tolerance. I
> understand the price to be $15.00 each and a lead
> time to be as long as 8 weeks. I also understand
> there is a 25 piece minimum. This being the case
> I will see if anyone on the Tesla discussion
> group would like to piggy back on the order.
>
> Very truly yours,
> Jim Mora
> Ojai
> 805 701 7569
>
>
>
>
>
>
>
> _____________________________________________________
> This message scanned for viruses by CoreComm
>
>
>