Re: how deep do the coilers prefer doing it? : )

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Dmitry (father dest)" <dest@xxxxxxxxxxx>

Hallo Claude,

take real three-phase motor, arrange windings in star connection,
connect phase "a" to the hot wire, phase "b" to the neutral one, phase
"c" to neutral again in series with capacitor, the motor will run at
65-85% of its nominal power - "It is still considered a single phase
motor because it is connected to a single phase supply"?
: D

> Original poster: "claudio masetto" <claudmas@xxxxxxxxxxxxxxx>

> It is still considered a single phase motor because it is connected to a
> single phase supply.
> The phase relationship between the run and start windings is different.

> It can be called a start or auxillary winding. I've seen it called both
> often.

> Claude.
> ----- Original Message -----

>  > Original poster: "Dmitry (father dest)"
> <<mailto:dest@xxxxxxxxxxx>dest@xxxxxxxxxxx>
>  >
>  > Hallo Claude,
>  >
>  > > Original poster: "claudio masetto"
> <<mailto:claudmas@xxxxxxxxxxxxxxx>claudmas@xxxxxxxxxxxxxxx>
>  >
>  > > Any winding in a single phase induction motor which is connected
>  > > directly accross  the supply is known as the run winding.
>  >
>  > cap run motor is not single-phase - it`s two-phase if you didn`t know.
>  >
>  > >  In a cap run motor a cap is connected in series with the start
>  > > winding and this cap is called the run cap but the winding is still
>  > > called the start winding.
>  >
>  > no, this is not starting winding - it`s auxiliary winding.

-----
Let the bass kick! =:-D