Re: Safety Gap Firing

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: otmaskin5@xxxxxxx 

Hi Scott, sorry, that was a typo.  I meant to say the safety gap 
firing even though it has greater separation than the main gap.

According to the 1.5 to 1 relationship you site, the safety gap 
should be 1.5 X 0.18 (main gap) or 0.27.  That is close to my current 
0.26 safety gap setting.  Seems I could open up the safety gap to the 
indicated 0.27, but is the difference significant enough to make a difference?

Dennis Hopkinton MA