Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Hi Dmitry,
They look pretty "typical" to me. However the tape peeling loose is
odd. I have seen hundreds if not thousands of them in various
varieties and tape peeling is unusual. I would not worry though. I
wonder if the -40 (C or F,... -40C = -40F) cold affected the tape a
bit. No worries though, they look fine ;-)) The tape should stick
right back down.
I guess beauty is in they eye of the beholder. They all look pretty
to me :-))
Cheers,
Terry
At 02:35 PM 1/25/2006, you wrote:
Hello.
here is the pictures (crappy like those caps):
"the box from C.D.":
http://himplast.ru/father_dest/temp/c(r)aps/box.jpg
they look good from the distance:
http://himplast.ru/father_dest/temp/c(r)aps/box2.jpg
http://himplast.ru/father_dest/temp/c(r)aps/box3.jpg
but not that good when you look at them more closely:
http://himplast.ru/father_dest/temp/c(r)aps/cap1.jpg
http://himplast.ru/father_dest/temp/c(r)aps/cap2.jpg
http://himplast.ru/father_dest/temp/c(r)aps/cap3.jpg
http://himplast.ru/father_dest/temp/c(r)aps/cap4.jpg
http://himplast.ru/father_dest/temp/c(r)aps/cap5.jpg
http://himplast.ru/father_dest/temp/c(r)aps/cap6.jpg
http://himplast.ru/father_dest/temp/c(r)aps/cap7.jpg
http://himplast.ru/father_dest/temp/c(r)aps/cap8.jpg
http://himplast.ru/father_dest/temp/c(r)aps/cap9.jpg
for comparison - this is russian hv cap for my marxgen (25kv, 2.2nF):
http://himplast.ru/father_dest/temp/c(r)aps/russian.jpg
http://himplast.ru/father_dest/temp/c(r)aps/russian2.jpg
design is the same, but their body is _much_ stronger and don`t have
so much defects.
-----
Let the bass kick! =:-D