[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: MMC bleed resistors

To: tesla@xxxxxxxxxx
Subject: RE: MMC bleed resistors
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 18 Jan 2006 04:50:49 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Wed, 18 Jan 2006 04:47:26 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <YQhp0M3kQMN.A.y4C.OrizDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Langer Giv'r" <transworldsnowboarding19@xxxxxxxxxxx>

10Mohm 1/2 watt

From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: MMC bleed resistors
Date: Tue, 17 Jan 2006 17:00:50 -0700

Original poster: "Gates" <ryker@xxxxxxx>

What value of bleed resistors can I use for my mmc setup?
I have 2000V CDE caps of .15mF
Thanks Gang
Gates

Prev by Date: Re: Splicing Magnet Wire
Next by Date: Re: Microwave caps.
Previous by thread: MMC bleed resistors
Next by thread: RE: MMC bleed resistors
Index(es):
- Date
- Thread