[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: voltage doubler for MOTs

To: tesla@xxxxxxxxxx
Subject: Re: voltage doubler for MOTs
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 16 Jan 2006 16:18:45 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Mon, 16 Jan 2006 16:18:29 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <lnkaYz3VeHD.A.02E.FnCzDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Jim Lux <jimlux@xxxxxxxxxxxxx>

At 05:53 AM 1/16/2006, Tesla list wrote:

Original poster: "Langer Giv'r" <transworldsnowboarding19@xxxxxxxxxxx>
Hey everyone, what would be the best way (schematic) to double theoutput voltage of 2 or 3 MOT's in parallel? thanks for the help

Do you need one output terminal grounded?

If not, two half wave doublers of opposite polarities in series works.

Prev by Date: Re: Capacitance HELP
Next by Date: RE Capacitance Help
Previous by thread: voltage doubler for MOTs
Next by thread: RE: voltage doubler for MOTs
Index(es):
- Date
- Thread