RE: Faraday cage with Paint

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Hooper, Christopher AZ" <christopher.az.hooper@xxxxxxxxx>

Bob and Dan,

You are correct; the cost would be an issue, 1k $ to paint garage is not
cost effective indeed. It is interesting that a paint company would have
this as a concept to shield Wireless Networks RF from leaving the house.
Tesla Coil power levels and frequency may not what this paint was
design. The paint could be an interesting experiment, and maybe other
paint companies will copy and drop the price. Good old chicken wire
still lives on!


Best rgs,
christopher robin.

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Wednesday, January 11, 2006 7:58 AM
To: tesla@xxxxxxxxxx
Subject: Re: Faraday cage with Paint

Original poster: "Bob (R.A.) Jones" <a1accounting@xxxxxxxxxxxxx>


Hi Criss,

Intriguing paint , it contains conductive fibers. Unfortunately it's
about
100 time more expensive than chicken wire per unit area at the
recommendced
one mm dry thickness and probably less effective particularly at Tesla
coil
frequencies. It's probably not conductive at DC and low frequencies in
which
case it will not protect the interior of your walls from direct arcs
from
your coil that contain a significant DC component.


 > Original poster: "Hooper, Christopher AZ"
<christopher.az.hooper@xxxxxxxxx>
 >
 >
 >
    I ran across a paint @
 > http://www.forcefieldwireless.com/defendair.html