[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Multi gazing balls as a top load was Re: Al duct vs Chicken Wire

To: tesla@xxxxxxxxxx
Subject: Re: Multi gazing balls as a top load was Re: Al duct vs Chicken Wire
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 11 Jan 2006 07:54:05 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Wed, 11 Jan 2006 07:51:54 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <OzaoZ6H1ifK.A.brB.JuRxDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: tesla <tesla@xxxxxxxxxxxxxxx>

FWIW I've had good success with Xmas Balls (25cm dia) covered in adhesive
Aluminium tape, cheap spherical topload. Needed to cover with AL tape as AL
coating on ball evaporated with discharge arcs due current density

Best
Ted L in NZ

Prev by Date: Re: tesla coil does not work...
Next by Date: Re: Ballasting a Pole Pig (Revisited)
Previous by thread: Re: Multi gazing balls as a top load was Re: Al duct vs Chicken Wire
Next by thread: Re: Multi gazing balls as a top load was Re: Al duct vs Chicken Wire
Index(es):
- Date
- Thread