[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tungsten Blanks



Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>



The 0.500 x 6 inch size in M-42 super high speed steel is priced at a reasonable $14.42. I'm going to order a dozen of these, chop them up with our diamond disk cutter, and see how they work in one of our G-10 rotors. If they work good I will make them available to the list.

Also, regarding the toroids, some members wanted a 24 x 6 inch size so we are going to see if we can mix the 20 x 5 size with the 24 x 6 size to get good pricing on both sizes for our bulk order. I will advise the list in a few weeks when I know.

Dr. Resonance



Original poster: "Jon Danniken" <danniken@xxxxxxxxxxx>

> Original poster: "MIKE HARDY" wrote:
>
> Earlier this summer there was a discussion on drill blanks for rotary
> electrodes. Someone pointed to a vendor that had 1 inch diameter X 8"
> tungsten drill blanks for about $100 each. Does anyone recall the
> vendor, and how to find this product?

The only place I have found that has C2 Carbide Blanks at a price comparable
to McMaster-Carr isWilliam T. Hutchinson, but they don't have the price you
are looking for.
http://www.drillblank.com

Jon