[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tungsten Blanks

To: tesla@xxxxxxxxxx
Subject: Re: Tungsten Blanks
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Fri, 06 Jan 2006 16:13:47 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Fri, 6 Jan 2006 16:07:50 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <gB_mQVHRCpC.A.fGF.GhvvDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx>

Mike,

Probably McMaster-Carr. Check out their webpage under "tungsten".

David Rieben

----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, January 06, 2006 11:04 AM
Subject: Tungsten Blanks

Original poster: "MIKE HARDY" <MHARDY@xxxxxxxxxx>
Earlier this summer there was a discussion on drill blanks forrotary electrodes. Someone pointed to a vendor that had 1 inchdiameter X 8" tungsten drill blanks for about $100 each. Does anyonerecall the vendor, and how to find this product?

Prev by Date: Re: HV xray cable revisited
Next by Date: Re: Flat vs V shape Primary
Previous by thread: Tungsten Blanks
Next by thread: Re: Tungsten Blanks
Index(es):
- Date
- Thread