[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: spark gap/ primary coil



Original poster: Jim Lux <jimlux@xxxxxxxxxxxxx>

At 03:19 PM 2/22/2006, you wrote:
Original poster: Just Justin <rocketfuel@xxxxxxxxxxxxx>


On the subject of 1/4" copper tubing, I wonder if any here have
recommendations for a good moveable clamp that fits the 1/4" tube
well?  My current clamp has some steel in it and tends to get
a bit too hot to touch after just a little while ;)

Justin


The clip from the end of a standard fuse holder (for 3AG type 1/4"x1-1/4" fuses) works quite nicely.