[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New Stackpole HV Resistors



Original poster: Shaun Epp <scepp@xxxxxxx>

I noticed on the right hand side of there home page, their SEI News mentions the new MG series.

Shaun Epp


----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Saturday, February 11, 2006 12:21 AM
Subject: Re: New Stackpole HV Resistors


Original poster: Sparktron01@xxxxxxxxxxx
Hi DC

IDK what is going on.  I suspect they made this announcement to
"drum up orders".  Parts look really good though for typical bleeder,
HV divider, meter multiplier applications that are constantly posted...

Regards
Dave Sharpe, TCBOR/HEAS


 -------------- Original message ----------------------
From: "Tesla list" <tesla@xxxxxxxxxx>
> Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
>
>
>
> Strange, but at the Stackpole website this series is not
> mentioned.  Even using the search feature for the MG series "no
> document found" comes up.
>
> Dr. Resonance
>
>
>
>
> >Original poster: Sparktron01@xxxxxxxxxxx
> >http://www.eeproductcenter.com/showArticle.jhtml?articleID=179102514
> >
> >Found this in a trade "e-magazine" at work today and thought would be > >of
> >interest to the list.  Cost is "aggressively" reasonable for
bleeder and other
> >high stress HV applications. Resistors are good for voltages 2 to 4X > >that
> >of conventional form factor resistors available through Radio
> >Sh..  or Digikey.
> >
> >Expand to full screen message and copy text into your browser. > >Interesting!
> >
> >Regards
> >Dave Sharpe, TCBOR/HEAS
> >Chesterfield, VA. USA
> >
> >
>
>
>