Re: Low-powered coil definition (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

Moderated and approved by: Gerry Reynolds <greynolds@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Sat, 23 Dec 2006 08:16:26 -0500
From: BRIAN FOLEY <ka1bbg@xxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Low-powered coil definition (fwd)

yes, i have a monster line filter too, came from a computer mainframe
power supply. 80 amps 3 phase about 30 lbs. enjoy the holidays! brian f.
----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, December 22, 2006 11:13 PM
Subject: Re: Low-powered coil definition (fwd)


> Moderated and approved by: Gerry Reynolds <greynolds@xxxxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Fri, 22 Dec 2006 19:51:32 -0600
> From: David Rieben <drieben@xxxxxxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Cc: David Rieben <drieben@xxxxxxxxxxxxxxx>
> Subject: Re: Low-powered coil definition (fwd)
>
> Ed, all,
>
> I have located near cinder-block sized, 3-phase, EMI
> line filters on ebay that were rated at 440 volts @
> 80 amps per phase in the past and indeed I am now
> using one in my "Green Monster" coil's control panel.
> http://www.teslauniverse.com/members/drieben/
> Since I am running 240 volt single phase (well technically,
> 2-phase), I simply use 2 of the 3 "hot" phases, one for
> each "hot" of the 240 volt input line. This filter is no whimp,
> as it weighs in at over 30 lbs. Cameron Prince uses
> one of these in his large coil's control panel, as well.
> http://www.teslauniverse.com/members/cprince/index.html
> Ed, were you refering to single phase EMI filters only in
> stating that 50 amps is the largest single EMI filter that
> you have seen?
>
> David Rieben
>
>
>
> ----- Original Message ----- 
> From: "Tesla list" <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Friday, December 22, 2006 4:36 PM
> Subject: Re: Low-powered coil definition (fwd)
>
>
> > Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>
> >
> >
> >
> > ---------- Forwarded message ----------
> > Date: Fri, 22 Dec 2006 10:44:02 -0500
> > From: Edward Wingate <ewing7@xxxxxxxxxxxxxxxx>
> > To: Tesla list <tesla@xxxxxxxxxx>
> > Subject: Re: Low-powered coil definition (fwd)
> >
> > Tesla list wrote:
> >
> > >Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>
> > >
> > >
> > >
> > >---------- Forwarded message ----------
> > >Date: Thu, 21 Dec 2006 03:34:05 -0800 (PST)
> > >From: Yurtle Turtle <yurtle_t@xxxxxxxxx>
> > >To: Tesla list <tesla@xxxxxxxxxx>
> > >Subject: Re: Low-powered coil definition (fwd)
> > >
> > >Thanks. I'm currently doing about the same by
> > >paralleling each phase of two 3 phase 30 amp filters,
> > >one for each leg, for 90 amps.
> > >
> > >I was just wondering if you had found a really large
> > >single EMI filter to do your whole lab.
> > >
> > >Adam
> > >
> > >
> > >
> > <snip>
> >
> > Adam,
> >
> > No, unfortunately, the largest single EMI filter I have ever seen is 50
> > amps.
> >
> > Ed
> >
> >
> >
>
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.15.26/598 - Release Date: 12/22/06
>
>