[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: X-ray transformer (fwd)



Original poster: List moderator <mod1@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Thu, 14 Dec 2006 06:51:01 -0600
From: David Rieben <drieben@xxxxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Cc: David Rieben <drieben@xxxxxxxxxxxxxxx>
Subject: Re: X-ray transformer (fwd)

Hi Chip,

Yes, I agree with Godfrey, it definitely looks like a
high frequency unit. Seems like they usually use around
10 kHz  to 20 kHz to drive the primary coil of this type
of "flyback on steroids". The drawback is that you have
a more complex primary drive circuitry than with a stan-
dard 60 Hz unit - i.e. you can't just hook 'er directly into 
your househould service mains in series with a ballast and 
start "sparking away" ;^) Definitely more portable than its
500 lb., 60 hZ fed, iron cored counterpart, though. Person-
ally, I kind of like the "old timey" beefy iron cored units,
though, as they're simpler to wire up and they're built like 
Ft. Knox! 


David Rieben


----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, December 14, 2006 1:15 AM
Subject: RE: X-ray transformer (fwd)


> Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>
> 
> 
> 
> ---------- Forwarded message ----------
> Date: Thu, 14 Dec 2006 00:27:53 -0600
> From: Godfrey Loudner <ggreen@xxxxxxxx>
> To: 'Tesla list' <tesla@xxxxxxxxxx>
> Subject: RE: X-ray transformer (fwd)
> 
> I suspect that its a high frequency unit. The primary of the transformer
> would be supplied by very high frequency current allowing the
> transformer to be very small in size. It may actually be very powerful.
> I've seen 150kV, 300mA high frequency transformers so small you could
> almost put them in a lunch bucket.   
> 
> Godfrey Loudner    
> 
> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx] 
> Sent: Wednesday, December 13, 2006 11:37 PM
> To: tesla@xxxxxxxxxx
> Subject: X-ray transformer (fwd)
> 
> 
> Original poster: List moderator <mod1@xxxxxxxxxx>
> 
> 
> ---------- Forwarded message ----------
> Date: Wed, 13 Dec 2006 23:05:08 -0500
> From: Chip Ford <chipford@xxxxxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: X-ray transformer
> 
> Hi everyone...I have found something and don't know if I can use it or
> not....Every heard of R&L Transfer??? They are based in Wilmington,
> Ohio. They have a salvage store where they try to sell things that get
> damaged during shipping to reclaim some of their cash. I went in last
> week and was looking around and came across a portable x-ray machine. I
> asked the guy how much. He told me $25 so, I bought it. I brought it
> home and dis-assembled it. I am attaching a picture of the transformer.
> Take a look and please comment. I also have the power supply. I'm not
> sure what the transformer is suppose to feed on. Hopefully it will
> handle 120 volts. It looks like a dual flyback transformer. It was in
> the container it is sitting on filled with transformer oil. It was
> manufactured in 1996 so...I didn't think pcb's would be a problem..If
> someone has experience with such an animal..Please help me out...Below
> is a link to (2) pictures...Thanks..Chip Ford
> 
> 
> 
> http://www.flickr.com/photos/11814425@N00/
> 
> 
> 
> 
> 
>