[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: New to list (fwd)
Original poster: List moderator <mod1@xxxxxxxxxx>
---------- Forwarded message ----------
Date: Tue, 12 Dec 2006 20:47:05 -0600
From: Alan Majernick <rainylake@xxxxxxx>
To: 'Tesla list' <tesla@xxxxxxxxxx>
Subject: RE: New to list (fwd)
Hi Chris:
John gave me a diagram for these motors. His circuit uses a second cap for
this motor. I will send you a copy.
Alan
-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Tuesday, December 12, 2006 7:24 PM
To: tesla@xxxxxxxxxx
Subject: Re: New to list (fwd)
Original poster: List moderator <mod1@xxxxxxxxxx>
---------- Forwarded message ----------
Date: Wed, 13 Dec 2006 08:46:17 +0800
From: westland <westland@xxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: New to list (fwd)
I'm putting together John Freau's SRSG Electronic Phase Controller, and
had a question about the capacitor. I purchased an Oriental 'reaction'
motor from Alan Majernick, which uses a motor-run capacitor ... I
believe these are basically there to phase shift to motor to its
torquiest operating state. For John Freau's circuit, do I just bridge
this capacitor with a 50Kohm resistor, or do I need a second capacitor?
Chris Westland