RE: rca 807 specs (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: List moderator <mod1@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Fri, 8 Dec 2006 07:08:10 -0600
From: Rich & DJ <rdj@xxxxxxxxxxxx>
To: 'Tesla list' <tesla@xxxxxxxxxx>
Subject: RE: rca 807 specs

The 807 is a small tube with about 750volt on the plate and 50watt out,
the 810 is a little better but why no use a 304TL or a 833? The 833 has
twice the plate dissipation of an 810 and the 304 comes close to that.
You can get these, 304 and 833, on e-bay. They are close to 900 to
1000watt out.
 For the pin out information just Google the tube number or go to a
local hamfest and pick up an old Radio Amateur's Handbook for a couple
of dollars. It has all the pin outs and tube specs in the back of the
book. What tubes do you have on hand???

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx] 
Sent: Friday, December 08, 2006 12:19 AM
To: tesla@xxxxxxxxxx
Subject: rca 807 specs

Original poster: "miles waldron" <mileswaldron@xxxxxxxxxxx>

Does anyone have the pinouts for the RCA 807 tubes? Or where a silly
person
like me can find out this kind of information? Are there any interesting
VTTC schematics that use this vacuum tube? What are these big huge
Macroni
810's all about? Any tube heads out there?

Miles