Re: bulkheads / baffles in secondaries

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: acmq@xxxxxxxxxxxxxxxx 

> Original poster: "Henry Hurrass" <Dr.Hankenstein@xxxxxxxxxxxxx>
>
> Here's what I do, and it works for me:
>
> Try going much slower with your blade....and use a continous blast of air
> from your air compressor to help keep the blade cool...patience required.
>
> Placing the parts in the freezer before cutting may help make longer cuts
> before the heat takes over.

I cut acrylic, or even poliethylene, with ease by applying some oil to the
blade. But I use always a manual saw. Oil helps a lot too when drilling or
tapping acrylic parts.

Antonio Carlos M. de Queiroz