[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Baffles

To: tesla@xxxxxxxxxx
Subject: Re: Baffles
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sun, 30 Apr 2006 12:48:42 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Sun, 30 Apr 2006 12:35:22 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <8x3vt95-NcE.A.xwH.qNQVEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Antonio Carlos M. de Queiroz" <acmdq@xxxxxxxxxx>

Tesla list wrote:

Original poster: "Rich" <rdjmgmt@xxxxxxxxxx>

Do I still need the baffles about 5 "inside the tube and shouldthey be vented in the center?


Baffles don't have a clear reason to be necessary. A spark would burn trough
most glues quite easily. Be careful with this 100 W bulb inside the form.
PVC deforms easily with heat.

Antonio Carlos M. de Queiroz

Prev by Date: Re: 1156 1256 variac question
Next by Date: Re: Sold state IGBT disruptive coil spark gap idea
Previous by thread: Re: Baffles
Next by thread: RE: Baffles
Index(es):
- Date
- Thread