[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: New coil takes shape

To: tesla@xxxxxxxxxx
Subject: RE: New coil takes shape
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sat, 29 Apr 2006 19:13:49 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Sat, 29 Apr 2006 19:01:01 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <CHkZSOeJSgH.A.1yG.NxAVEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Lau, Gary" <Gary.Lau@xxxxxx>

It sounds counter-intuitive until you actually look at one.  See
http://users.rcn.com/laushaus/tesla/primary_files/image003.jpg
This shows the point where the top and bottom coils are joined in the
center.  If both coils had been constructed identically, the current
flow would make an abrupt reversal between the coils, and their
inductance would cancel each other rather than reinforce each other.

Regards, Gary Lau
MA, USA

> Original poster: "Mike Tucknott" <michael.tucknott@xxxxxxxxxx>
> Just one qustion do the two primarys need to be wound in oposite
direction

Prev by Date: Re: 1156 1256 variac question
Next by Date: Re: 1156 1256 variac question
Previous by thread: New coil takes shape
Next by thread: Re: New coil takes shape
Index(es):
- Date
- Thread