[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Potential Transformer
- To: tesla@xxxxxxxxxx
- Subject: Re: Potential Transformer
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 28 Sep 2005 13:52:31 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Wed, 28 Sep 2005 13:54:36 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <-AoSe.A.lYB.6TvODB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
If you haven't wound the sec yet, go to 24 AWG 180 or 200 degree wire ---
around 1,400 turns with aspect ratio of 4.5:1.
I've run these PTs at 4 kVA keeping run time to 45 sec or less.
Dr. Resonance
I was lucky enough to procure a Westinghouse PT-15 from Dr. R
(Thanks !) at the Cheesehead teslathon. From what I could gather
it's a 1750 VA, 120v to 14.4 KV unit. First I was wondering how far
I can push this unit? I was hoping to get up to 4 KVA on a 6" X
32" sec. with #20 wire. On another note I was wondering how to go
about conditioning the output? RF filtering etc. Is a modified terry
filter what I need? As always thanks in advance.
Mike.