[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: skin depth in round conductors Re: 8 kHz Tesla Coil

To: tesla@xxxxxxxxxx
Subject: Re: skin depth in round conductors Re: 8 kHz Tesla Coil
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sat, 24 Sep 2005 15:36:17 -0600
Delivered-to: testla@pupman.com
Delivered-to: tesla@pupman.com
Old-return-path: <vardin@twfpowerelectronics.com>
Resent-date: Sat, 24 Sep 2005 15:38:27 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <Zb_nTC.A.hKB.SdcNDB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>

Hi Ed,

Agree as I think all would. The problem is not will it work, but for myself, a personal interest on how much emphasis I put into a design on certain losses.

Take care,
Bart

Tesla list wrote:

Original poster: Ed Phillips <evp@xxxxxxxxxxx>

I don't know about "recommended" wire sizes, but it should be possible
to determine the properties (Q or resistance) for a particular design
and if they come out OK it should work.

Ed

Prev by Date: Re: skin depth in round conductors Re: 8 kHz Tesla Coil
Next by Date: inductance vs. volt-seconds
Previous by thread: Re: skin depth in round conductors Re: 8 kHz Tesla Coil
Next by thread: Re: skin depth in round conductors Re: 8 kHz Tesla Coil
Index(es):
- Date
- Thread