[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Spark Gap Design
- To: tesla@xxxxxxxxxx
- Subject: RE: Spark Gap Design
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 07 Sep 2005 09:25:46 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Wed, 7 Sep 2005 09:25:40 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <zCJJdD.A.PMF.xZwHDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Derek Woodroffe" <tesla@xxxxxxxxxxxxxxx>
Dirk,
The only reason for using copper tube in a larger PVC or similar
insulator pipe is so that you can easily blow air over the gaps. There is
no reason why you can't make a linear arrangement and blow air through those
gaps. I have use this arrangement with a couple of 80mm fans and It worked
as well as any other gap arrangement I have tried.
http://www.roffesoft.co.uk/tesla/bt/bigtess.htm
Derek