[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Propeller Gaps & Timing!

To: tesla@xxxxxxxxxx
Subject: Re: Propeller Gaps & Timing!
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 24 Oct 2005 10:35:49 -0600
Delivered-to: testla@pupman.com
Delivered-to: tesla@pupman.com
Old-return-path: <vardin@twfpowerelectronics.com>
Resent-date: Mon, 24 Oct 2005 10:38:34 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <JrEwTD.A.uN.H4QXDB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Freddie Hamilton" <crzydmd@xxxxxxxxxxx>

WOW! You can wire up a 15/1380 power supply! Who needs a 14.4kV 20kVA pig anyway?

From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: Propeller Gaps & Timing!
Date: Sat, 22 Oct 2005 07:41:06 -0600

Original poster: "Ken May" <kens.coil@xxxxxxxxxxx>

I have lots of 15/60nst to play with and I don't like to kill them .
The one thing I know is my suker gap is never open more then 1/4",
a syncronous gap  out of sink how know..

http://hot-streamer.com/temp/May-NST.JPG

Prev by Date: Resistor sizing for primary capacitors
Next by Date: Re: Top-load altering Q-factor of secondary cct
Previous by thread: RE: Propeller Gaps & Timing!
Next by thread: RE: Propeller Gaps & Timing!
Index(es):
- Date
- Thread