[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Propeller Gaps & Timing!

Original poster: "Scott Hanson" <huil888@xxxxxxxxxxxx>

Jeremiah -

Can you provide a detailed description your salient pole synchronous motor,
and how you confirmed that it running in salient-pole mode?

Scott Hanson
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, October 21, 2005 5:34 PM
Subject: Propeller Gaps & Timing!


> Original poster: tesla popp <teslas_lab@xxxxxxxxx>
>
> I have been ajusting my syncronious gap for half an
> hour now, and I can't seem to get the timing right!
>
> I have a 15/120 nst that is charging a 0.05uF MMC.
> That's *2.35 : 1* for the needed cap for a Static
> setup.
>
> The safty gaps are set at max voltage break down and
> are firing at only 70% of full power
>
> I am absolutely SHURE that my motor is salent pole
> syncronious @ 1800rpm in case anyone is wondering.
>
> What should I do to get this thing to work?????
>
>
> Coiler Forever: Jeremiah Popp
>
>
>
>