[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: primary coil??

Original poster: Jim Lux <jimlux@xxxxxxxxxxxxx>

At 11:28 AM 10/16/2005, you wrote: 
Original poster: "Langer Giv'r" <transworldsnowboarding19@xxxxxxxxxxx>

hey does the primary coil have to be solid copper? or can you buy copper tubing where the walls are only about 1/8 or 1/16 inch thick? Thanks 

Excellent idea..and what most folks do..

Of course, when you're dialing it in, you can use bare AWG12 or AWG14.. then, when you get an idea of where your coil tunes, you can replace it with bigger tubing.