[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: half filter?? and what all I need before primary circuit

To: tesla@xxxxxxxxxx
Subject: Re: half filter?? and what all I need before primary circuit
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Thu, 13 Oct 2005 22:11:14 -0600
Delivered-to: testla@pupman.com
Delivered-to: tesla@pupman.com
Old-return-path: <vardin@twfpowerelectronics.com>
Resent-date: Thu, 13 Oct 2005 22:12:49 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <8csIs.A.rN.BBzTDB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

Correction. The order is of importance not expense.

Gerry

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
Hi Daniel,
I would recommend protection in this order of expense.
1. Safety gap
2. Resisters and caps
3. MOV's

Prev by Date: RE: Tube TC
Next by Date: Re: half filter?? and what all I need before primary circuit
Previous by thread: RE: half filter?? and what all I need before primary circuit
Next by thread: Re: half filter?? and what all I need before primary circuit
Index(es):
- Date
- Thread