[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Fwd: O-scope & tuning
- To: tesla@xxxxxxxxxx
- Subject: Re: Fwd: O-scope & tuning
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 12 Oct 2005 14:55:41 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Wed, 12 Oct 2005 14:59:52 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <VGHpTC.A.ZjE.HlXTDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Hi Tim,
Here are some nice web pages!
http://myweb.tiscali.co.uk/teslatutorial/MEASUREMENTS.htm
http://f3wm.free.fr/tesla/tc_meas.html
http://myweb.tiscali.co.uk/teslatutorial/
Look these over and ask more. A book could be written on Tesla coil
measurements, but this should get you started.
Cheers,
Terry
At 11:33 AM 10/12/2005, you wrote:
hey all,
got my first o-scope but no manual, so excuse my ignorance, i also
have a small DIY wave generator. so...i got my secondary : 20" L, 3"
Dia, 24 gauge, 995 turns
How do you physically hook it all up? I know to tune the 2ndry first
then prim. but do you hook the probe to rf grnd and other to
topload? Same as wave gen??
remember the 1st time you did this? i feel more lost now then the
day i started gathering parts, many months ago! any guidance would
be greatly appreciated
tjr
Return-path: <Timjroche@xxxxxxx>
From: Timjroche@xxxxxxx
Full-name: Timjroche
Message-ID: <199.48eb47f8.307d922f@xxxxxxx>
Date: Tue, 11 Oct 2005 18:09:51 EDT
Subject: O-scope & tuning
To: tesla@xxxxxxxxxx
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="-----------------------------1129068591"
X-Mailer: 9.0 for Windows sub 5119
hey all,
got my first o-scope but no manual, so excuse my ignorance, i also
have a small DIY wave generator. so...i got my secondary : 20" L, 3"
Dia, 24 gauge, 995 turns
how do you physically hook it all up? i know to tune the 2ndry first
then prim. but do you hook the probe to rf grnd and other to
topload? same as wave gen??
remember the 1st time you did this? i feel more lost now then the
day i started gathering parts, many months ago! any guidance would
be greatly appreciated
tjr