Re: new coil/rotary spark gap

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: d a <btoc3000@xxxxxxxxxxxx>

Hi there,

I am interested to buy a spark gap structure from you too as I do not 
have any workshop accessible to me. I am using a static spark gap at 
the moment.

Do you charge differently for the async/sync motors?

Kindly revert on the price that you are looking at.

Thank you!
Sam (from Singapore)

Tesla list <tesla@xxxxxxxxxx> wrote:
Original poster: tesla popp

I missed your message the first time. Ok, i will
build you one, but we will have to determine a price.
It would be much easyer to make it async instead of
sync, but i CAN do both. Do you want the complete
setup, or did you just want a motor and rotor assy?

I have both sync and async motors in stock. I will
use any $ I get for it to fund my Monster Coil.

You sugest a price, and i'll see if it will be cool.
Contact me off list with that info.

wish ya good luck.

Coiler Forever: Jeremiah Popp

--- Tesla list wrote:

> Original poster: motosk8er2@xxxxxxx
>
> hey tesla pop, wanna build me one or atleast supply
> me with the parts?
>
> -----Original Message-----
> From: Tesla list
> To: tesla@xxxxxxxxxx
> Sent: Fri, 07 Oct 2005 22:25:40 -0600
> Subject: Re: new coil/rotary spark gap
>
> Original poster: tesla popp
>
<teslas_lab@xxxxxxxxx>
>
> I have the things here to build a spark gap for 4kw
> use. I would be building a propeller gap. But you
> could build one just as easily as i could. Terry
> blake has it on his site...
>
>
http://www.tb3.com/tesla/sparkgaps/index.html
>
>
>
> These are sooooooo easy to make
>
> --- Tesla list
> <tesla@xxxxxxxxxx> wrote:
>
> > Original poster: "Chris Rutherford"
> >
>
<chris1@xxxxxxxxxxxxxxxxxxx>
> >
> > Hi Andrew
> >
> > You'd be suppressed about what you can make from
> > things you can get
> > locally i.e. garage, old Hoovers, microwave fans
> > etc.
> >
> > Here are a couple of RSGs that I made using easy
> to
> > find things such
> > as RC car motors, microwave fan motor...
> >
> >
>
http://www.hackinghardware.com/tesla/arsg.jpg
>
>
> >
> > I'd have another go you'll get more satisfaction
> > that way. What sort
> > of power level are you intending to switch?
> >
> > Thanks
> >
> > Chris
> >
> > ----- Original Message -----
> > From: "Tesla list"
> <tesla@xxxxxxxxxx>
> > To: <tesla@xxxxxxxxxx>
> > Sent: Friday, October 07, 2005 8:01 PM
> > Subject: new coil/rotary spark gap
> >
> >
> > Original poster:
> motosk8er2@xxxxxxx
> >
> >
> > Hello all,
> > After a long time i have decided to build another
> > coil, it has a 4
> > inch by 4 foot secondary and the primary isnt
> made
> > yet. I have stuck
> > with static spark gaps but i want more power and
> > have decided to go
> > with a rotary spark gap. I have tried 3 times but
> i
> > dont have the
> > materials needed for a good quality set up. Does
> > anyone have one
> > laying around they would be interested in
> selling,
> > or making me one?
> > Also would a flat primary be better or would a
> cone
> > shaped one. I am
> > farely new and only built a few coils so any help
> is
> > greatly
> > appreciated, thanks Andrew
> >
> ;
> >
> >
>
>



Meet your soulmate!
<http://us.rd.yahoo.com/prm/pers/mt/yma_sg/tgl/*http://asia.yahoo.com/meetic>Yahoo! 
Asia presents Meetic - where millions of singles gather