Original poster: Ed Phillips <evp@xxxxxxxxxxx>
"I have been a High Voltage nut for many, many years! And Finely I am
going to build my first coil!
Here is what I have so far to build it with.
1) One 10kva 14.4kv Pig
2) Four 1256 Powerstats, I am going to parallel two
for voltage control and parallel the other two and run them in series
with the output of the first stack for current control (will this
work)? I also have two paralleling chokes that came with the stack.
3) Three 0.04uf 100kv Maxwell Pulse Discharge caps.
4) Four 0.03uf 35kv Maxwell Pulse Discharge caps. (
I will probably sell these for cheep)
5) Five 92mf 535VAC Oil Filled Caps for PFC"
First coil?????
Ed