[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Help with my First Coil
- To: tesla@xxxxxxxxxx
- Subject: Re: Help with my First Coil
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 04 Oct 2005 05:24:55 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Tue, 4 Oct 2005 05:26:28 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <aQro7.A.FNE.ibmQDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Ed Phillips <evp@xxxxxxxxxxx>
"I have been a High Voltage nut for many, many years! And Finely I am
going to build my first coil!
Here is what I have so far to build it with.
1) One 10kva 14.4kv Pig
2) Four 1256 Powerstats, I am going to parallel two
for voltage control and parallel the other two and run them in series
with the output of the first stack for current control (will this
work)? I also have two paralleling chokes that came with the stack.
3) Three 0.04uf 100kv Maxwell Pulse Discharge caps.
4) Four 0.03uf 35kv Maxwell Pulse Discharge caps. (
I will probably sell these for cheep)
5) Five 92mf 535VAC Oil Filled Caps for PFC"
First coil?????
Ed