[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Winding a Spiral Primary



Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

There's much in the archievs on this, even recently.

Gerry R.

Original poster: "bmcpeak" <bmcpeak33@xxxxxxxxxxx>
Yes please Help! I have the same problem
Brad McPeak
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Saturday, November 26, 2005 2:55 PM
Subject: Winding a Spiral Primary

Original poster: Drbillpmt@xxxxxxx
Hi All,
I'm having a problem winding spiral flat coils of 1/4" and 3/16" copper tubing. Som of the pictures posted show flat coils that are works of art! I'm usually pretty good at things mechanical, but I just can't seem to be able to devise a way to repetitively, and accurately, wind many coils necessary for a customer order.
The center of the spiral is quite small.
Dr. Bill