[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Big Bruiser's transformer?



Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>



I welded up the tank.  It's 14.4 kV output.  21 kV peak.

Dr. Resonance


Dr. Res,
Thanks for the info. Could you also tell me what it's
output voltage is and if it was originally a pole pig
that was repotted into the x-ray tranny tank?
David Rieben
----- Original Message -----
From: Tesla list <tesla@xxxxxxxxxx>
Date: Tuesday, November 29, 2005 8:31 am
Subject: Re: Big Bruiser's transformer?
> Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
>
>
>
> It's a 25 kVA unit capable of operating up to 60 kVA for short
> duty cycles.
>
>
> Dr. Resonance
>
>
>
> Subject: Big Bruiser's transformer?
>
>
> >Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx>
> >
> >Hi Dr. R,
> >
> >I have a question regarding the transformer that you
> >are using for your "Big Bruiser", as seen on:
>
><http://www.tb3.com/tesla/ch2005/pages/IMG_5024.html>http://www.tb3.co
m/tesla/ch2005/pages/IMG_5024.html
> >I assume that the high voltage transformer is the blue
> >steel tank? It looks a lot like the exterior tank of an
> >x-ray transformer. As I wasn't fortunate enough to make the
> >2005 Cheesehead Teslathon (but hopefully WILL make the
> >2006 one :^) I was wondering about the specs of this trans-
> >former.?
> >
> >Thanks,
> >David Rieben
> >
> >
>
>
>
>