[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Safety gap issues



Original poster: "JT Bowles" <jasotb@xxxxxxxxxxx>

Got it, thanks. That equation still comes up with a very low output voltage for my coil.


From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: Safety gap issues
Date: Sun, 27 Nov 2005 19:20:15 -0700

Original poster: Jim Lux <jimlux@xxxxxxxxxxxxx>

At 05:30 PM 11/27/2005, you wrote:
Original poster: "JT Bowles" <jasotb@xxxxxxxxxxx>

Whoa, whoa, whoa. People, which is it?

*Vo = Vgap x SQRT(Cp/Cs)
            OR
*Vo = Vgap x SQRT(Cp/2Cs)

The one withOUT the 2 is the idealized voltage in the coupled circuit
The other is a working rule of thumb, based on getting to 70% of ideal.