[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: capacitors for PFC?

To: tesla@xxxxxxxxxx
Subject: Re: capacitors for PFC?
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 28 Nov 2005 00:19:17 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
In-reply-to: <20051128050538.72019.qmail@xxxxxxxxxxxxxxxxxxxxxxx>
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
References: <20051128050538.72019.qmail@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Mon, 28 Nov 2005 00:27:02 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <VwQhHbYTJSH.A.UmB.GFriDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>

Hi,

Motor run caps are always over rated in voltage. 240, 370, 660 VACare common. There are also 180V ones around. I have never seen anyrated for 120VAC.


There is no problem in using ones rated at a "higher" voltage.

Cheers,

        Terry


At 10:05 PM 11/27/2005, you wrote:

Hi all,
Can somebody tell me what kinds of caps would work for PFC besidesmotor run caps because I can't seem to find any 120 volt motor run caps?
Thanks in advance.

Robert,

Prev by Date: Re: Official air breakdown voltage?
Next by Date: Re: Unpot (possible PCB content)
Previous by thread: capacitors for PFC?
Next by thread: Re: capacitors for PFC?
Index(es):
- Date
- Thread