[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: series or parallel???



Original poster: "Qndre Qndre" <qndre_encrypt@xxxxxxxxxxx>

Hi,

there are many different configurations but the "standard" one is to put the spark gap across the output terminals of the high voltage transformer and the lc circuit in parallel to the spark gap. The coil and the capacitor forming the lc circuit are wired in series. It's difficult to explain so look at this page: http://deepfriedneon.com/tesla_wiring.html

There are several other configurations which may also work.

Regards, Q.

----Original Message Follows----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: series or parallel???
Date: Sat, 26 Nov 2005 17:01:54 -0700


Original poster: "Langer Giv'r" <transworldsnowboarding19@xxxxxxxxxxx>

Hi again, I have seen many schematics where the spark gap is series and the Capacitor is parallel and vice-versa... Which is hte proper way to put the LC circuit, which is parallel and which is series?? Thanks for input.

Daniel From Canada

_