[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Ballast Current Setting
- To: tesla@xxxxxxxxxx
- Subject: Ballast Current Setting
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 17 Nov 2005 17:05:37 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Thu, 17 Nov 2005 17:06:23 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <uuCVtB.A.24C.7rRfDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "MIKE HARDY" <MHARDY@xxxxxxxxxx>
My 6" coil is the first one using a variable ballast to set current
on the line side of my PT. I found amperages with a current xfmr, and
meter. output was jumping a sparkgap, that's all. I set the current
for what my Cp required. When monitoring my actual coil this current
had jumped from 15A to between 22 and 25A. Should I be adjusting the
curent for the actual coil, or my initial way ?